|
Available Grains
-
Plain Sawn
- May contain any combination
of the following types of grain classification: Plain Sawn, Rift Sawn, and
Quarter Sawn.
-
Quarter Sawn
- In cross section, the angle
of the annual ring tangent to the face of the piece is between 45° and 90°.
At least 50% of the piece contains Quartered characteristics which include
grain lines that are mostly parallel to the length of strips and medullar
ray flecks present and more than 1/16" wide.
-
Rift Sawn
- In cross section, the angle
of the annual ring tangent to the face of the piece is between 30° and 60°.
At least 75% of the piece contains Rift characteristics which include grain
lines that are mostly parallel to the length of strips and medullar ray
flecks less than 1/16" wide.
-
Rift & Quartered
- A combination of Rift Sawn
and Quarter Sawn.
Available Grades
-
Clear
- Contains mostly heartwood with a
minimum number of character marks and discoloration providing a uniform
appearance while allowing for all heartwood natural color variations.
Average bundle length is 3-3/4'.
-
Select &
Better
-
Contains coloration variations produced by differences of natural heartwood
and sapwood, along with slight imperfections such as small tight knots (one
allowed every 3'). Average bundle length is 3-1/4'.
-
1 Common
-
Contains prominent variations in coloration and varying characteristics such
as knot holes (no bigger than 1/4" in diameter) and heavy
mineral streaks. Average bundle length is 2-3/4' or better.
-
2 Common
- Same as 1 Common with sticker
stain, worm holes, and sound natural variations creating a contrasting appearance. Average
bundle length is 2-1/4' or better.
|
